Experimental study on the detonation process of a pulse detonation engine with ionized seeds

An experimental platform of a pulse detonation engine (PDE) was established to study the effect of different K₂CO₃ ionized seed mass contents on the detonation process. The pressure and ion concentration were detected in the detonation process of the PDE with different contents of ionized seeds. The initiation process of the PDE at different ignition frequencies was studied. The results show that the gas conductivity in the detonation process increased by adding ionized seeds to the PDE tube, and the conductivity increased with the increase in ionized seed mass content. With the increase in ionized seed mass content, the range of the conductivity decreased. The PDE was successfully ignited and formed a stable detonation wave at ignition frequencies of 5 Hz and 10 Hz, and the peak pressure of the stable detonation with the ignition frequency of 5 Hz was 17% higher than that with an ignition frequency of 10 Hz. The detonation wave intensity was weakened and degenerated to a shock wave that propagated in the tube without the fuel filled at the ignition frequency of 20 Hz.     

基于粒子群优化的蚁群算法在战场电磁频率分配中的应用

为对战场电磁频率进行有效分配以减少用频设备间的相互干扰，提出了将一种基于粒子群优化的蚁群算法应用于频率分配的方法。首先介绍了战场频率管控流程的相关内容，并以干扰度最低为目标函数，使用基于粒子群算法优化的蚁群算法进行频率分配管理。粒子群算法优化蚁群算法中启发信息的权重及信息素挥发系数，作为粒子群位置和速度参数进行初始化，将粒子群算法生成的分配结果作为蚁群算法的初始信息素，利用蚁群算法较强的寻优能力寻找最佳分配方案。实验结果验证了该算法和模型的可行性。     

自行火炮发动机振动仿真研究

针对某型自行火炮柴油发动机系统,采用Matlab软件的Simulink 工具,建立了整个系统的动力学仿真模型。分别对该模型进行正弦、白噪声信号扰动下的仿真,从系统输出转矩和转速的曲线结果分析,证明了该模型具有较好的可信度。该模型的建立为今后深入开展发动机仿真研究提供了基础。     

基于金属膜电阻的大功率低电感负载

利用金属膜电阻设计并制作了用于陡化前沿Marx发生器调试的大功率低电感负载.其阻值约为90Ω,电感约为55nH,基本不具备分散电容.该负载采用线性渐变的圆锥外型结构,有利于减小信号在负载上的反射,配合电容分压器使用能够很好地完成对前沿约为几ns的快前沿高压脉冲的测量.理论估算了该负载的功率容量,并利用PSpice软件模拟了对其进行脉冲方波加载的情况.该负载用于调试陡化前沿的Marx发生器的实验中,获得了幅值约210kV,脉宽近40ns,前沿为5ns的快前沿高压脉冲.多次实验结果表明该负载性能稳定,适用于陡化前沿Marx发生器的调试工作.     

基于振动烈度的柴油机供油系统断油故障检测方法

研究了振动烈度的相关方法和理论,以WD615柴油机供油系断油故障诊断为例,通过各缸断油时振动烈度值与正常状态下振动烈度值的比较分析,验证了利用振动烈度进行发动机供油系统故障诊断方法的正确性。     

Sensor radiation interception risk control in target tracking

This paper is mainly on the problem of radiation interception risk control in sensor network for target tracking. Firstly, the sensor radiation interception risk is defined as the product of the interception probability and the cost caused by the interception. Secondly, the radiation interception probability model and cost model are established, based on which the calculation method of interception risk can be obtained. Thirdly, a sensor scheduling model of radiation risk control is established, taking the minimum interception risk as the objective function. Then the Hungarian algorithm is proposed to obtain sensor scheduling scheme. Finally, simulation experiments are mad to prove the effectiveness of the methods proposed in this paper, which shows that compared with the sensor radiation interception probability control method, the interception risk control method can keep the sensor scheduling scheme in low risk as well as protect sensors of importance in the sensor network.     

一类装甲车辆对不平路面的激励响应模型

研究内容为(轮式、履带)车辆在不平路面行驶和通过障碍时的平顺性问题。利用状态方程法建立了包括随机和确定路面轮廓、3维车体等较为通用的车辆行驶平顺性模型。并针对行驶振动中车轮与悬架的碰撞建立了专门模型。对某型装甲车辆进行了计算机仿真和验证,对模型的精度和有效性进行检验和评估。结果表明所建立的车辆-地面系统模型是有效的。该模型和建模采用的方法为装甲车辆的系统设计和动力学分析提供了一条途径。     

基于调制FFT有限域搜索的MUSIC频率估计算法

为满足跳频频率测量中频率估计高精度及实时性的要求,提出了一种将调制FFT和MUSIC算法相结合的频率算法:首先利用调制FFT对谐波频率进行预估计,确定感兴趣的频域区间;然后利用MUSIC算法在锁定区间内估计伪谱谱峰的位置,实现频率的精确估计。该算法可得到较高的频率分辨率,并减少了MUSIC算法的谱峰搜索范围。仿真试验表明:该算法的频率分辨率高,且实时性能满足频率测量需求。     

基于FRFT窄带滤波的LFM信号研究

随着分数阶傅里叶变换域窄带滤波技术的不断应用与发展,对分数阶域窄带滤波带宽的研究将变得尤为重要。研究了分数阶傅里叶变换域窄带滤波带宽与滤波后信号之间的关系,并以信号的失真度为准则,分析了分数阶域窄带滤波带宽的临界值。理论分析和仿真结果表明:线性调频信号经过分数阶域窄带滤波后信号的相位没有发生改变,信号的幅度为辛克函数积分的形式。为保证LFM信号频率信息不丢失,分数阶域窄带滤波的带宽必须不小于LFM信号在分数阶域幅度谱的主瓣宽度。为分数阶域滤波带宽的选取提供了参考标准。     

无源单站定位技术研究

无源定位技术已成为现代化战争中对抗"四大威胁"的关键技术。在研究目标来波方向(DOA)与多普勒频率的基础上,提出一种基于最小二乘估计的运动目标单站定位跟踪方法。经计算机仿真表明,该方法不仅能对运动目标进行定位,而且能对运动目标的速度、航迹等进行估计。